Wear resistant combination three piece pulp valve
Nominal diameter: DN100~800 (mm)
Nominal pressure: 1.0-10.0MPa
Technical Parameter
Product model: BSKZ series
Nominal diameter: DN100~800 (mm)
Nominal pressure: 1.0-10.0MPa
Suitable temperature: ≤150℃
Applicable medium: pulp, slag, water
Body material: Q235/WCB/304/316
Connection standards: GB/T9112-9124, HG20592-20605, JB/T74-90
[Essential information]
The three type wear-resistant slurry valve overcomes the conventional
flat gate valve only single transport medium (oil or water)
shortcomings, has good tightness in the fully open and fully closed, is a
kind of high technology, high quality, fluid resistance is small,
simple structure, reliable operation of the new valve.
By
the gate and the left valve sealing plate structure three piece, all
wearing parts are concentrated around the seal plate, when the need to
replace the parts, just opened around the valve plate, it is convenient
to replace, solve the particle mud valve perforation, damaged parts
after the problem of inconvenient disassembly.
Add：No.1 Changfu Xincheng, Wuhan Economic and Technological Development Zone
COPYRIGHT ? 2017,www.jiyizs.cn
BOSTER VALVE GROUP Co., Ltd
ICP 12018354 Support: Feng Sheng Technology
